CF MOTO CF125T-19 2003, Service Manual

Page: 155 / 241

10 Gearbox
10
10-5
Remove final shaft bearing with special
tools.
Use the same tools and reverse the re-
moval procedure for installation.
Remove the drive shaft bearing and coun-
tershaft bearing at the gearbox
’ s side, with
the same special tool.
Special tools:
Disassembly tools for bearing: 1P52MI-
A-922-050000
-060000
-080000
Press a new drive shaft bearing vertically,
with its countermark side upwards, into
the gearbox housing till it is stopped by
the bottom sidestep of bearing hole.
Repeat the above step for installation of
countershaft bearing.
Apply lubricant to the new final shaft oil
seal, and install the oil seal with its lip side
facing the gearbox side.
Caution
Keep the oil seal in parallel with surface,
Do not block the leakage hole.