CF MOTO CF125T-19 2003, Service Manual

Page: 216 / 241

7 Electrical start ignition Overriding clutch
17
17-1
Maintenance information 17-1 Starter relay 17-2
Troubleshooting 17-1 Starting motor comp 17-2
Overriding clutch 17-5
Maintenance information
Notice:
• Bundle the wires of the same color. Wires of different colors should be connected with the wires of the
same color. Set colored sleeve at the connection part. Connectors should be connected with couplers of
the same colors.
Maintenance Standard
Item Standard Service Limit
Brush length 10mm 7mm
Troubleshooting
Starting motor does not run
• Insufficient charging of battery
• Faulty contact of main switch
• Faulty contact of starting switch
• Faulty starter relay
• Faulty contact of wire sleeves, couplers and terminators, and short circuit or open circuit.
• Faulty starting motor
• Melted fuse
Starting motor is too weak.
• Battery Voltage is insufficient.
• Faulty contact of wire sleeves, couplers and terminators;
• Foreign matters in the motor or starting gear.