page 47
www.centsys.com
FIGURE 81
Battery
Harness
Charger
Connect both batteries up with the
supplied harness, and ensure that it
is connected to the left side of the
Charger.
Route the accessory cables around
the back of the Charger and through
the cable retainers found in front of
the Control Card.
COMPLETING THE INSTALLATION
SECTION 8
Opening the two retaining doors,
reveal the storage space for
accessory products, such as the
G-ULTRA, or External Receivers.
Wire the accessory device to the
operator, place it into the space
provided, and close the door.
8.2. Accessory Installation and Storage
There are dedicated trays below the D5 SMART Control Card to conveniently install and
store any accessories connected to the Operator.
FIGURE 82
FIGURE 83
Right
Door
Left
Door
Control
Card
Accessory
Retaining
Door
G-ULTRA
