page 42
www.centsys.com
OPERATOR INSTALLATION
SECTION 7
It is important to ensure that the harness for the Override Sensor is routed
through the correct location when inserting the Lower Battery Tray back into
position.
The Override Sensor harness is
routed directly in front of the electric
motor.
There is a groove located in the
middle of the Lower Battery Tray, on
the motor's side. The harness needs
to be routed between the electric
motor and the Lower Battery Tray
here as the Lower Battery Tray is
placed back into position.
FIGURE 70
Lower
Battery Tray
Groove for
Harnesses
FIGURE 69. OVERRIDE SENSOR
If the Override Sensor has previously been removed, take note of how it is
placed back into position correctly, before continuing with the installation.
7.10. Re-assembling the D5 SMART
Note the
orientation of the
Override Sensor
Override
Sensor
Override
Sensor
Locating Slot
7.10.1. Override Sensor
7.10.2. Routing the Override Sensor Harness
Push the Override Sensor "A" firmly
until it seats onto the gearbox "B"
A
B
