page 56
www.centsys.com
Once the installation has been successfully completed and tested, it is important for the
installer to explain the operation and safety requirements of the system.
NEVER ASSUME THE USER KNOWS HOW TO SAFELY OPERATE AN AUTOMATED
GATE!
Even if the user has used one before, it does not mean they know how to SAFELY operate
it. Make sure that the user fully understands the following safety requirements before
finally handing over the site.
The following needs to be understood by the user:
• How to operate the Manual Release mechanism.
(Show them how by demonstration)
• How the obstruction detection and all other safety features work.
(Show them how by demonstration)
•
All the features and benefits of the Operator, i.e. Beams, etc.
• All the safety considerations associated with operating an automated gate. The user
should be able to pass this knowledge on to all other users of the automated system
and must be made aware of this responsibility.
• Do not activate the Gate Operator unless you can see it and can determine that
its area of travel is clear of people, pets, or other obstructions
• DO NOT CROSS THE PATH OF A MOVING GATE. Always keep people, pets and
objects away from a moving gate and its area of travel
• NEVER LET CHILDREN OPERATE OR PLAY WITH THE GATE CONTROLS, and do
not allow children or pets near the gate area
•
Avoid close proximity with moving parts where fingers, hands or clothing could
be pinched and caught
• Secure all easily-accessible gate operator controls in order to prevent
unauthorised use of the gate
• Keep the automated gate system properly maintained, and ensure that all
working areas are free of debris and other objects that could affect the gate
operation and safety
• On a monthly basis, check the obstruction detection system and
safety devices to ensure correct operation
• All repair and service work to this product must be done by a
suitably qualified person
• This product was designed and built strictly for the use documented herein. Any
other uses not included herein, could compromise the operating condition of
the product and/or be a source of danger!
Centurion Systems (Pty) Ltd does not accept any liability caused by improper use of
the product, or for use other than that for which the automated system was designed.
Ensure that the customer is in possession of the User Guide and that you have
completed the installation details in the back of the User Guide.
10. Installation Handover
INSTALLATION HANDOVER
SECTION 10
