page 34
www.centsys.com
OPERATOR INSTALLATION
SECTION 7
In the event of a power failure,
it may be required to lock the
cover in place whilst "latching" the
manual release (i.e. manual release
permanently enabled).
This helps prevent theft of the unit,
or its components, and provides full
protection from the elements.
With the release handle in the open
position, slide the Override Cam
switch located on the inside of the
handle towards the gearbox, and
a "click" can be heard once it has
located correctly. Return the handle
to the closed, or locked, position.
This allows continued manual
operation of the gate while ensuring
that the cover remains securely
locked in place. See Figure 48.
To re-engage the D5 SMART
(i.e. take the operator out of latched
Manual Override), push the Release
Handle Override Cam to the left and
then slide it towards the Camlock.
See Figure 49.
FIGURE 48
FIGURE 49
Release Handle
Override Cam
Release
Handle
Override
Cam
Release Handle
Release Handle
Camlock
7.7. Manual Override
Before mounting the rack to the gate, ensure that the D5 SMART is in
Manual Override. Follow the instructions below.
FIGURE 47
Release
Handle
Camlock
Gearbox
To disengage(manual override) the
motor, ensure that the Camlock is in
the "unlocked" position, and pull the
Release Handle as far left as it will
go. The Motor will then be placed in
a temporary state of disengagement.
Manual Override Latching
