page 10
www.centsys.com
SPECIFICATIONS
SECTION 2
2.2. Technical Specifications Continued
TABLE 1 CONTINUED
1. Can operate off a solar supply, consult your local dealer for assistance
2. Based on 25°C ambient temperature and unit not in direct sunlight
3. Based on a motor push force of less than 50% of rated (Starting and Running forces)
4. Gate opening and closing speeds can be configured to run slower depending on the requirements of individual installations
5. Can increase battery capacity for longer standby times
6. Based on 4m gate, excluding all accessories
7. Multiple buttons per remote can be used
Fuse Protection
Type
Rating
Main Control Card
Serviceable
25A
Aux. Supply
Resetable Fuse
12V 600mA
or
24V 3A
(10sec Pulse)
Charger (Mains Supply)
Non-serviceable
3A slow-blow
Motor push force - starting
30kgf
Motor push force - rated
17kgf
Gate mass - maximum
500kg
Gate length - maximum
100m
Gate speed (varies with load)
4
30m/min @ 17kgf
Manual Override
Lockable with key release
Operations in standby (6Ah Batteries)
Half day
5,6
44
Full day
5,6
35
Collision Sensing
Electronic
Operating temperature range
-15°C to +50°C
Onboard receiver type
Code-hopping multichannel receiver
with selective add and delete
Receiver code storage capacity
1500 Remotes
7
Receiver frequency
433.92MHz
Degree of protection
IP55
Mass of unit packed (with standard kit, but
excl. rack and battery)
9.1kg
Packaging dimensions (with standard kit,
but excl. rack and battery)
325mm wide x 244mm deep
x 445mm high
