page 38
www.centsys.com
OPERATOR INSTALLATION
SECTION 7
RAZ Rack
FIGURE 59
TEK screw
(Self-drilling and -tapping)
Gate
RAZ
Rack
Fix the RAZ Rack to the side of the
gate using the TEK screws provided.
Use the vertical slots in order to
allow for adjustment.
FIGURE 60
When fitting RAZ Rack, it is easier to
start on the right and work towards
the left.
The RAZ Rack sections simply
interlock with each other.
Start on the right
and work to the left
FIGURE 61
Fit an additional fixing
screw through the
horizontal slots to secure
the rack to the gate
directly above the Pinion
when the gate is in the
closed, pedestrian and
open positions as shown
in Figure 61.
Fit an addition screw through
the horizontal slots at the
ends of each section of Rack
to further strengthen the
joins.
