Cattron™ MP96/48 Series Portable Remote Control Systems
User Manual
79
68C-MP96/48-RD-EN
Version 006
Note:
There are 48 possible ASO FAULT and ASO LOOP FAULT logs, depending on the application.
There are ten possible custom engineered logs. These logs may or may not be included in the LAST 32
LOG.
7.9
Logged Bulletins
All logged events are time and date stamped. When the datalog is subsequently downloaded or viewed, the date
and time of each occurrence will be identified. Logged Bulletins are grouped into several area listings as
described below.
7.9.1 Standard Logged System Event Bulletins
System event bulletins are messages generated by operating conditions within the MP96 system. As well as
being logged, some system event bulletins may also be displayed during normal system operation
– refer to the
. Some or all of the bulletins shown in Table 6 may be displayed.
Table 6: Standard Logged System Event Bulletins
Display Line 1
Display Line 2
[OPR1] OUTPUT ON
CONTROL PROC ONLINE
[OPR1] OUTPUT OFF
CONTROL PROC OFFLINE
[OPR2] OUTPUT ON
SECONDARY PROC ONLINE
[OPR2] OUTPUT OFF
SECONDARY PROC OFFLINE
RANGE LIMITING ACTIVE
XMITTER OUT OF RANGE
MOTOR WATCHDOG OUTPUTS
ARE ENABLED
MOTOR WATCHDOG OUTPUTS
ARE DISABLED
DECODER POWER ON
SWITCH ACTIVATED
HARD RESET
RESET BUTTON WAS PRESSED
SOFT RESET
INTERNAL SOFTWARE RESET
CPU TIMEOUT
PROCESSOR RESETTING
LADDER LOGIC FAULT
RESET DECODER
DECODER IS IN ESTOP
WAITING FOR VALID MESS
DECODER MOTOR WD OUTPUTS
ARE KILLED/DISABLED
*FAULT* SYSTEM SHUTDOWN
REPAIR & RESET CAUSE
TILT SWITCH ACTIVATED
DROPPED/TILTED XMITTER
DECODER ONLINE
ALL OUTPUTS ACTIVE
