24
EN
Printer powers down while printing is in progress.
Possible Causes
Action
Page
Battery power is low
or the wrong type of
batteries are loaded in
the printer.
Load a fresh set of AA-size alkaline
batteries (supplied by you). Or use
the specified separately available AC
adaptor.
7
8
21
Ink ribbon is being fed from the tape outlet along with the tape.
Possible Causes
Action
Page
Tape cartridge loaded
while the ink ribbon is
slack.
Remove the tape cartridge and check
to make sure the ink ribbon is not
broken. Next, take up any slack in the
ink ribbon and then reload the tape
cartridge.
Important!
Before loading a tape cartridge into
the Label Printer, always make sure
you take up any slack in the ink
ribbon first.
If the ink ribbon is broken, you must
change to another tape cartridge.
9
Tape Cutting
Cannot cut tape.
Possible Causes
Action
Page
Tape cutter blade is dull.
Take the Label Printer to the dealer
from whom you purchased it to have
the tape cutter blade replaced.
—
Printed text is cut off by tape cut operation.
Possible Causes
Action
Page
Out of tape
Replace the tape cartridge with a
new one.
9
Using Labels
Label will not adhere to a surface.
Possible Causes
Action
Page
The backing paper is still
on the back of the tape.
Peel the backing paper from the back
of the tape to expose the adhesive.
18
Surface is unsuitable for
affixing a tape.
Labels do not adhere well to surfaces
that are rough, wet, oily, or dirty.
18
