Casio KL-120TH, User Manual

Page: 26 / 29

25 EN
Error Messages/Display Messages
Message Possible Causes Action
EXCESS LINES

The number carriage
returns you input causes
the label to exceed the
maximum number of
lines for the tape you are
using.

Use wider tape or reduce
the number of lines.
6mm tape...1 line
9mm tape...1 line
12mm tape...Up to 2 lines
18mm tape...Up to 2 lines
INITIALIZE!

Data in memory has
become corrupted for
some reason.

Press any key to initialize
the Label Printer.
LOW BATTERY!

Battery power is low.

Ambient temperature is
below 10°C (50°F).

Replace the batteries
with new ones or use the
specified AC adaptor.

Use the printer in a
location within the
operating temperature
range (10°C to 35°C;
50°F to 95°F).
NO DATA!

You are attempting to
recall text from memory
when there is none
stored.

Store the text in memory
and then try again.
OVERWRITE?

You are attempting to
store text in memory
when it already contains
text.

Press OK to overwrite the
existing text with the new
text, or
to cancel the
store operation.
Message Possible Causes Action
PRINT ERROR!

The tape became
jammed during printing.

Turn off the printer
and remove the tape
cartridge. Next, remove
the jammed tape.
* If the steps described
above do not clear the
error message, contact
your retailer or your
nearest CASIO service
center.
TAPE IS LONG

This message appears
when the length of the
tape that will actually be
printed is longer than the
specified tape length.

To print, press OK .

To cancel printing,
press
. You can then
decrease the number of
characters or change to a
longer tape setting.