
Revision 1.3a
Page 4
2.4.
Power Connector, Power Status LED and Reset Button
2.4.1.
Type of Power Supply ( XLR 5xxA, XLR 5xx )
The XLR 5xxA uses AC power. C100 ~ +240V AC to the connector of XLR 5xxA using a
power cord enables it power the unit on. The XLR 5xx uses a DC adapter which supplies 5V DC 3A. The
difference in power inputs makes the two products easily identifiable.
2.4.2.
Power Status LED
This LED shows the status of power supply. Table 2-1 summarizes the indication of the LED.
Table 2-1
LED
Power Status
On
Normal
Off
Power not being connected or abnormal operation of power circuit
2.4.3.
Reset Button
This is a button to reset the system. With a pointed tool, such as a ball-pen, users may reach
the button. The system may be reset, once the user clicks the button. Added to this, if user
keeps pressing the button until all the 2BASE-TL LEDs blink five times, the system restores to
the manufacturing configuration
Table 2-2
Operation on reset button
Result
Clicking
System reset
Pressing Until 2BASE-TL Blinks 5 Times
System reset as factory default
2.5.
Console Part
For local management and configuration connect a maintenance terminal (for example, PC), to
the XLR 500. The Interface is an RS-232 interface provided via an RJ-45 female connector.
Figure 2-2 shows the pin assignments for the console port.