Revision 1.3a
Page 55
XLR 550 Manual
4.8.4
show auto-ratecontrol
To display the information of auto-ratecontrol function.
Usage
show auto-ratecontrol
Confirmation
see also,
“
set auto-ratecontrol
”
.
Examples
[Example 8-7] displaying the configuration of auto-ratecontrol function
XLR550> (enable)
show auto-ratecontrol
Auto Rate Control: enabled
XLR550> (enable)
Output Fields
keyword
description
Auto Rate Control
Admin status of auto-ratecontrol.
4.9
Filter Commands
This section describes a list of commands that configure and display information about filter
The XLR500 series supports MAC address filter function. This filter is to block specific MAC access
and will be very useful as a good protection against network congestions caused by users on vicious
purpose. The XLR500 series provides 100 entries for filtering MAC addresses.
4.9.1
set filter mac
To configure information about MAC address filter.
Usage
set filter mac
<mac address>
{
drop
|
forward-to-cpu
}
Arguments
keyword
Description
<mac address>
The specific MAC address to filter.
drop
The specific MAC address to be dropped.
forward-to-cpu
The specific MAC address to be forwarded to the CPU.