Revision 1.3a
Page 71
XLR 550 Manual
4.15
Software Image Management
This section describes a list of commands you can use to manage the system software.
The XLR500 series supports two software images. These images are stored in two banks of the
system
’
s non volatile memory. A file can be stored in either bank (0 or 1). You can use the
”
show
system
”
command to display the bank.
When the system is started, it loads the startup image that is selected by
“
set system bootimage
”
command.
4.15.1
show image
To display the information about the stored software image.
Usage
show image
Confirmation
See also,
“
set system
”
,
“
copy
”
.
Examples
[Example 15-1] display software image information
XLR550> (enable)
show image
Image Version Build Date
------ ---------------- --------------------------------
image0 1.0.1 Fri Nov 10 12:56:38 2006
image1 1.0.1 Fri Nov 10 12:56:38 2006
XLR550> (enable)
4.15.2
copy commands for software image
Upload or download system software to or from memory bank or FTP server,
Usage
copy ftp
<
image name
>
copy
<
image name
>
ftp
copy
<
src image name
>
<
dst image name
>
Arguments