Revision 1.3a
Page 43
XLR 550 Manual
Output Fields
keyword
description
ip
IP address of this interface.
gw
IP address of default gateway.
If this interface does not have default gateway, this field
is not printed.
vid
VID of this interface.
* This field is only printed in XLR 550 series.
4.5
Device Type Commands
This section describes a list of commands that configure and display information about device type of
the XLR500 series.
4.5.1
set devicetype
The XLR500 series can operate in either Central Office (CO) or Remote Terminal (RT) mode.
This command enables the configuration of device
’
s operational mode.
Usage
set devicetype
{
co
|
rt
}
Arguments
keyword
Description
co
XLR500 series operates in Central Office mode.
rt
XLR500 series operates in Remote Terminal mode.
Note
When using
rt
type, you don
’
t need to supply values for PMEs
because the co device supplies these values to the rt device.
Confirmation
see also,
“
show devicetype
”
,
“
restart pme
”
.
Note
To apply the changed configuration, the PMEs must be restarted.
Examples
[Example 5-1] setting the device to RT mode
XLR550> (enable)
set devicetype rt
XLR550> (enable)
restart pme
p0
This command will restart p0,p1,p2,p3.
Do you want to continue (y/n) [n]?
y
XLR550> (enable)