Revision 1.3a
Page 31
XLR 550 Manual
Enable Disable.
Either enable or disable sending SNMP traps to your SNMP Server.
Host Address
– The Address of the SNMP Host you want to send the XLR Traps to.
Receive Community
. The name of the community string for the specified SNMP Trap Host
5.13.
Set Up> Set SNTP
The
Network Time Protocol
(
NTP
) is a protocol for synchronizing the clocks of computer systems over
packet-switched, variable-latency data networks. NTP uses UDP port 123 as its transport layer. It is
designed particularly to resist the effects of variable latency (jitter).
This option sets up the SNTP option.
SNTP Client Mode
– enable or disable the option.
SNTP Server Address
– The address of the SNTP server with which to synchronise
Time zone
– The time zone the XLR is to operate within
Polling interval
- 1 to 1,000,000 minutes
5.14.
Set up> Write Config
There are two configuration images held in FLASH config0 and config 1.
This command copies the current configuration to the non - volatile memory.
5.15.
Set Up> Copy