Revision 1.3a
Page 9
Plug the end of the power cable into the power terminal ( +100 ~ +240V AC ).
Plug the other end of the power cable into the power connector on the front panel of the
XLR 5xxA.
Power LED on the front panel may turn on if the power supply is normal.
2.9.3
Grounding XLR 5xx and XLR 5xxA
Touching the ports on the front panel or connecting cables may induce static electricity. In the
extreme, this can damage the chipsets in the XLR 5xx’s system. To prevent this effectively,
user may wear a grounding wrist strap before installing or dealing with XLR 5xx.
In addition, grounding the system through the ground pin ensures a better electrical ground.
You may see the ground pin (left symbol) on the front panel (left most on XLR 5xxA’s and
rightmost on XLR 5xx’s panel). Wire this ground pin from the XLR to a suitable earth or
ground point.
2.10
Connecting the LAN Port to Other Network Devices
Confirm if the UTP cable connector is a RJ-45 jack.
Connect one end of the UTP cable to the network equipment such as a switch or hub.
Connect the other end of the UTP cable to one of the ports named "10/100BASE-T" on
the front panel of the XLR 5xx.
NOTE :
The LAN port is auto-MDI/MDIX capable; you can use either straight-through or
Crossover cable to connect a network device (PC or Hub/Switch).
2.11
Connecting 2BASE-TL PORT
< Figure 3-4 > 2BASE-TL Port Connection