Revision 1.3a
Page 46
XLR 550 Manual
Note
To apply the changed configuration, the PME must be restarted.
Examples
[Example 6-1] configuring data rate of the p1
XLR550> (enable)
set pme
p1
minrate
4096
XLR550> (enable)
set pme
p1
maxrate
5696
XLR550> (enable)
restart pme
p0
Note
XLR500 series supports an aggregation of bonded PMEs. And if you change
the configuration of any PME, you must restart the bonded PMEs. If you
restart any PME, all PMEs will be restarted.
[Example 6-2] configure transmission type of p1, p2
XLR550> (enable)
set pme
p1,p2
annex a
XLR550> (enable)
restart pme
p0
[Example 6-3] configure power back-off of p0, p1, p2
XLR550> (enable)
set pme
p0-p2
powerbackoff
3
XLR550> (enable)
set pme
p0-p2
powerbackoff enable
XLR550> (enable)
restart pme
p0
[Example 6-4] configure target SNR margin of the all PME
XLR550> (enable)
set pme all targetmargin
6
XLR550> (enable)
restart pme
p0
4.6.2
show pme
To display information about 2BASE-TL PMEs.
Usage
show pme
{
all
| <
pme name
> }
Arguments
keyword
description
all
Display information about all PME.
<
pme name
>
Name of the PME.
p0
…
p3
Confirmation
See also,
“
set pme
”
,
“
restart pme
”
.