Carroll Spirit User Instruction Manual Download Page 85 | Manualshive

Page: 85 / 110

Carroll Spirit User Instruction Manual Download Page 85

Spirit™ Bed Owner’s Manual – 1-70-001 – Rev D

© Carroll Hospital Group Inc.

Page 85 of 110

4.1.6

Specific Maintenance Requirements for Spirit Select™ Beds

Perform annual calibration of the scale on your Spirit Select™ bed or immediately following the replacement
of one or more load cells and/or the CB10 control box. See page 74 for Calibration Menu navigation and
page 76 for scale calibration instructions.

NOTE:

To ensure scale accuracy, use only ASTM, OIML, NIST (or equivalent) certified test masses when

performing scale calibration. If your healthcare facility does not have certified test masses, enlist

the service of an accredited calibration laboratory/service to perform scale calibration. Ensure that

the calibration laboratory/service has been accredited by Measurement Canada (or equivalent
“weights and measures” certifying body/agency).

NOTE:

Calibrating the bed angle is the first step of scale calibration. If the scale has just been calibrated

or is about to be calibrated, there is no particular reason to calibrate the bed angle as a separate

step.

If your Spirit Select™ is equipped with the underbed obstruction sensing option, perform monthly inspection
of all six obstruction sensor pads to ensure that they are in good working order and continue to operate
properly.

•

Ensure that contact at any point on EACH of the six obstruction sensor pads stops all downward bed
motion.

•

Ensure that the bed automatically elevates the 1” safety distance.

•

Ensure audible and visual warnings are present as described on page 50.

•

Replace any obstruction sensor pad that fails to operate correctly or consistently.

«
...
83
84
85
86
87
...
»

Summary of Contents for Spirit















































































































Reviews:

No comments