manualshive.com logo in svg

Carroll Spirit, User Instruction Manual, Page: 29 / 110

Share
Download
Carroll Spirit User Instruction Manual Download Page 29

Spirit™ Bed Owner’s Manual – 1-70-001 – Rev D  

© Carroll Hospital Group Inc. 

                                  Page 29 of 110 

2.4

 

Siderail Assemblies 

 

Your Spirit™ bed will be equipped with one of the following four types of siderail assemblies: 

 

 

Siderail Types 

Spirit™ 

Spirit Plus™ 

Spirit Select™ 

Carroll Assist Rails™ 

Standard 

- 

- 

Full Length Non-Tuck Siderails 

Optional 

- 

- 

Partial Length Non-Tuck Siderails 

Optional 

- 

- 

Quad Siderails 

Not Available 

Standard 

Standard 

 

2.4.1

 

Carroll Assist Rails™ 

 

Your Spirit™ bed comes with Carroll Assist Rails™ as standard equipment. The Carroll Assist Rails™ are 
packaged separately from the bed and must be installed before the bed can be put into service.  Remove 
the assist rails from their packaging and fit them to the main frame rails on either side of the bed.   
 

Installing Carroll Assist Rails™  

The release knob always faces outward and the “ASSIST” handle section of the assist rail points either 
towards the foot of the bed in the “ASSIST” position, or down in the “GUARD” position. 
1.

 

Mounting holes on the main rail of 
the bed frame are below the mattress 
deck.    Assist rail shown in “ASSIST” 
position. 

2.

 

Place one 3/8 flat washer on the 3/8-
16 X 2" long hex head screw and 
push this from outside the bracket, 
through the mounting hole in the 
main rail of the bed frame.   Place 
another 3/8 flat washer over the bolt 
on the inside of the main frame rail 
mounting hole then secure with a 
3/8-16 locking nut.  Tighten with two 
9/16" wrenches or socket wrenches. 

3.

 

Repeat for second fastener for the 
assist rail on this side of the bed. 

4.

 

Repeat the installation on the other 
side of the bed for the remaining 
assist rail assembly. 

NOTE:  PATIENT LEFT SIDE SHOWN 
NOTE:  HEAD AND SEAT SECTIONS OF MATTRESS 

DECK AND A FRAME CROSS MEMBER ARE CUT-
AWAY FOR CLARITY 

ITEM 

 PART DESCRIPTION 

PART NUMBER 

QTY 

1 

ASSIST RAIL – PATIENT LEFT SIDE (SHOWN) 
ASSIST RAIL – PATIENT RIGHT SIDE (NOT SHOWN) 

RL3-010-26-1 
RR3-010-26-1 

1 
1 

2 

3/8-16 X 2 LONG HEX HEAD SCREW 

BLT382-P 

4 

3 

3/8-16 LOCKING NUT 

NUT38N-L 

4 

4 

3/8 FLAT WASHER 

WSR38U-SS 

8 

“ASSIST” handle

Summary of Contents for Spirit















































































































Reviews:

No comments