manualshive.com logo in svg

Carroll Spirit, User Instruction Manual, Page: 84 / 110

Share
Download
Carroll Spirit User Instruction Manual Download Page 84

Spirit™ Bed Owner’s Manual – 1-70-001 – Rev D  

© Carroll Hospital Group Inc. 

                                  Page 84 of 110 

4.1.5

 

Specific Maintenance Requirements for Siderail Assemblies 

 

Perform monthly inspection of siderails to ensure that they are in good working order and continue to 
operate properly.  
 

Spirit™ Beds: 

 

•

 

Ensure that each siderail fully and smoothly rotates from the DOWN or “TRANSFER” position to the 
UP, “ASSIST” and/or “GUARD” positions. Ensure that no binding and/or grinding noises are caused 
when the siderails are rotated. If a siderail fails to rotate fully and smoothly, service and/or replace 
siderail assembly. 

•

 

Ensure that the locking/latching mechanism reliably self-engages when the siderails are fully rotated 
to the raised/closed to the UP, “ASSIST” and/or “GUARD” positions. If locking/latching mechanism 
fails to reliably self-engage service and/or replace siderail assembly. 

•

 

Ensure that the locking/latching mechanism completely disengages when the knob is pulled 
outwards permitting the siderails to fully rotate to the DOWN or “TRANSFER” positions. If 
locking/latching mechanism fails to completely disengage, service and/or replace siderail assembly. 

 

Spirit Plus™ and Spirit Select™ Beds: 

 

•

 

Ensure that each siderail fully and smoothly rotates from the DOWN position to the UP position. 
Ensure that no binding and/or grinding noises are caused when the siderails are rotated. If a siderail 
fails to rotate fully and smoothly, service and/or replace siderail assembly. 

•

 

Ensure that the locking/latching mechanism reliably self-engages when the siderails are fully rotated 
to the raised/closed position.  If locking/latching mechanism fails to reliably self-engage service 
and/or replace siderail assembly. 

•

 

Ensure that the locking/latching mechanism completely disengages when the  push button is 
depressed permitting the siderails to fully rotate to the lowered/open position. If locking/latching 
mechanism fails to completely disengage service and/or replace siderail assembly. 

 

  WARNING 

 

Patient entrapment within, under, between, and beside siderails may cause injury or death. 

Ensure only specified mattress (must be at least 6” thick) is used on bed. Ensure that mattress is 

in good condition and maintains proper resilience. If mattress is exhibiting any signs of wear (ie: 

reduced cross sectional thickness, reduced resilience, etc) stop use immediately and replace 

mattress to limit patient exposure to a potential rail entrapment situation.

 

 

  WARNING 

 

To help minimize the potential for patient entrapment, Carroll Hospital Group strongly 

recommends that the customer perform thorough inspection of all siderail assemblies to confirm 

continued compliance to IEC 60601-2-38 by conducting annual examinations of each siderail 

assembly to test described in IEC 60601-2-38, Amendment1, Clause 23.101. If testing results 

indicate a potential risk of patient rail entrapment, discontinue patient bed use and remove the 

bed from active service immediately.

 

 

Summary of Contents for Spirit















































































































Reviews:

No comments