Carroll Spirit, User Instruction Manual, Page: 57 / 110

Spirit™ Bed Owner’s Manual – 1-70-001 – Rev D © Carroll Hospital Group Inc. Page 57 of 110
3.10.1 Instructions: Patient Weight Change Zero
Patient Weight Change Zero – YES Selected
KG units used for this example
To zero the patient weight change:
1. Use the UP/DOWN Arrow buttons to scroll to the
“YES” option.
2. Press ENTER to zero patient weight change.
3. The display will automatically return to the home
screen.
The patient weight change will now show +0.0 (LB or
KG depending upon which unit of measure has been set
for patient weight display). Patient weight and weight
change are displayed in the same unit of measure.
Patient Weight Change Zero – NO Selected
If this selection was made by accident or you do not
wish zero the patient weight change at this point, simply
use the UP/DOWN Arrow buttons to scroll to the “NO”
option
1. Press ENTER to not zero patient weight change.
The display will automatically return to the “WT
CHANGE ZERO” screen of the Main Menu.
2. Use the UP/DOWN Arrow buttons to scroll to the
“EXIT MENU” screen of the Main Menu.
3. Press ENTER button to exit the Main Menu to the
home screen.
The patient weight change will remain unchanged.
NOTE:
Carroll Hospital Group recommends that the patient weight change is zeroed once a
new patient enters the bed.
From page 56
Resets
Patient Weight
Change
to +0.0