manualshive.com logo in svg

Carroll Spirit, User Instruction Manual, Page: 32 / 110

Share
Download
Carroll Spirit User Instruction Manual Download Page 32

Spirit™ Bed Owner’s Manual – 1-70-001 – Rev D  

© Carroll Hospital Group Inc. 

                                  Page 32 of 110 

2.5

 

Installing Corner Mattress Keepers 

 

Depending on how your bed was shipped, the corner mattress keepers may need to be installed on the 
bed.  All corner mattress keeper fasteners are included in a clear plastic hardware bag inside the corner 
mattress keeper bag at the foot end of the bed.  See step 6 on page 27. 
IMPORTANT: There are two left side and two right side corner mattress keepers.   
IMPORTANT: Ensure that the longer, tapered edge is parallel with the side of the bed 

Corner Mattress Keeper Installation 

1.

 

Align square hole in corner 
mattress keeper with the 
moulded holes in the head end 
and foot end sections of the 
mattress deck as shown. 

2.

 

Insert a 1/4-20 X 5/8” long 
carriage bolt through the top of 
the corner mattress keeper hole. 

 

 

3.

 

Lift the mattress deck to gain 
access. Start a 1/4-20 hex nut 
on the carriage bolt. Tighten 
using a 7/16 wrench or socket 
wrench. 

4.

 

Repeat for the second hole on 
the first corner mattress keeper. 

5.

 

Repeat for the three remaining 
corner mattress keepers. 

 

 

 

  CAUTION 

 

DAMAGE to mattress deck may occur. 
Over-tight fasteners could cause the mattress deck to crack. 
Do not over-tighten the corner mattress keeper hardware. 

 

 

Summary of Contents for Spirit















































































































Reviews:

No comments