manualshive.com logo in svg

Carroll Spirit, User Instruction Manual, Page: 18 / 110

Share
Download
Carroll Spirit User Instruction Manual Download Page 18

Spirit™ Bed Owner’s Manual – 1-70-001 – Rev D  

© Carroll Hospital Group Inc. 

                                  Page 18 of 110 

  DANGER 

 

EXPLOSION Hazard 
DO NOT operate this bed in the presence of a flammable anaesthetic mixture with air or 
with nitrous oxide. 

 

  DANGER 

 

Possible FIRE Hazard exists if the handheld pendant is not disabled when using oxygen 
administering equipment.  If bed is equipped with a pendant, disconnect the pendant 
from the port at the side of the bed and insert pendant into its holster or attach pendent 
to bed linen using the included linen clip when not in use. 
Keep pendant cord clear of moving equipment. 

 

  DANGER 

 

Possible FIRE Hazard exists when connecting the electric cord to a 120V wall outlet if 
oxygen administering equipment is in use. 
Use either a patient nasal mask or ½-length tent, ensuring the tent never extends below 
the mattress deck, when administering oxygen. 

 

  WARNING 

 

DO NOT roll the bed over the power supply cord.  DO NOT entangle the power supply 
cord on other objects.  A pinched power supply cord can become damaged is could be 
dangerous.  Be aware of the power supply cord location especially when moving the bed.

 

  WARNING 

 

This equipment may cause electromagnetic disturbances to its environment.  The bed 
has NOT been evaluated for electromagnetic compatibility (EMC). 
The performance of this equipment may be degraded when exposed to electromagnetic 
disturbances and/or electrostatic discharge.

 

 

Summary of Contents for Spirit















































































































Reviews:

No comments