Carroll Spirit User Instruction Manual Download Page 37 | Manualshive

Page: 37 / 110

Carroll Spirit User Instruction Manual Download Page 37

Spirit™ Bed Owner’s Manual – 1-70-001 – Rev D

© Carroll Hospital Group Inc.

Page 37 of 110

3.3

Bed Positioning

3.3.1

Bed Elevation – HI-LO Operation

To raise the bed, press the
BED UP arrow on the
footboard staff control, the
rail staff controls, or on the
pendant.
Release the button when
the desired elevation has
been achieved.

To lower the bed, press
the BED DOWN arrow on
the footboard staff control,
the rail staff controls, or on
the pendant.
Release the button when
the desired elevation has
been achieved.

3.3.2

Head Elevation - Head Actuator Operation

To raise the head section
of the bed, press the HEAD
UP arrow on the footboard
staff control, the rail
staff/patient controls, or on
the pendant.
Release the button when
the desired elevation has
been achieved.

To lower the head section
of the bed, press the HEAD
DOWN arrow on the
footboard staff control, the
rail staff/patient controls,
or on the pendant.
Release the button when
the desired elevation has
been achieved.

«
...
35
36
37
38
39
...
»

Summary of Contents for Spirit















































































































Reviews:

No comments