![background image](http://html1.mh-extra.com/html/carrier/transicold-x4-7300/transicold-x4-7300_operation-and-service-manual_2564193095.webp)
5–5
62-11637
4. Data entry screens are displayed for the UNIT MODEL #, TRAILER ID #, UNIT SERIAL #, SET DATE &
TIME and SET NEW HOURS (in a replacement main microprocessor) Configurations. To change a data
entry screen press the “=” key with the configuration highlighted.
a. A data entry screen will be displayed with the entry points in a horizontal row of “fields”. The first selection
“field” will be highlighted. Press the “=” key to enter the field then press the Arrow keys to scroll through the
available selections.
When setting a number, the numbers 1 to 9 and the letters A to Z will be displayed.
When entering the date & time the day, month, year, hour or minute will be displayed. The system uses
a 24 hour clock. Hours 00 to 11 are AM and hours 12 to 23 are PM.
With the desired selection in the field, press the “=” key to save the field entry.
b. Press the
▲
or
▼
key to move to the next field or to the desired field. Press the “=” key to enter the field then
press the
▲
or
▼
key to scroll through the available selections. With the desired selection in the field, press
the “=” key to save the field entry.
c. Continue as above to enter additional field changes as required.
d. When all the fields are displayed as desired, press the SAVE soft key to save the setting into memory.
e. Continue as above to enter additional UNIT IDENTIFICATION changes as required.
5. To change a value selection screen, press the “=” key with the desired Configuration sub-menu highlighted
as in Sample Screen A. The individual Configurations within the sub-menu will display as in Sample Screen
B. Press the
▲
or
▼
key to scroll through the individual Configurations. The individual Configurations will
highlight as the list is scrolled.
a. With the desired individual Configuration highlighted, press the “=” key. The highlight will move to the pres-
ent setting. As in Sample Screen C. Press the
▲
or
▼
key to scroll through the available settings. With the
desired setting highlighted, press the “=” key to select. Refer to
for information on the settings in
each sub-menu and resultant System actions.
b. Continue as above to enter additional sub-menus and set additional individual Configurations as required.
NOTICE
Technician Mode should be canceled when work is complete. If Technician Mode is not can-
celed, Technician Mode will be available for 60 minutes after the last key press without requir-
ing a code, even after placing the SROS in the OFF and then back in the RUN/STOP position.
6. Once activity requiring use of Technician Mode is complete, Technician Mode should be manually canceled,
refer to
BACK
EXIT
UNIT IDENTIFICATION (2 OF 4)
UNIT MODEL #:
TRAILER ID #:
UNIT SERIAL #:
SET DATA & TIME:
NDK537N6LF0
MY TRAILER #1
NAR91108766
MAY 23 2013 08:27
CANCEL
SAVE
INSTRUCTIONS
Press UP/DOWN To Select Field
EQUAL to Modify Field
SET #
CANCEL
SAVE
28
FEB 2011 09:42
INSTRUCTIONS
Press UP/DOWN To Select Field
EQUAL to Modify Field
SET DATE AND TIME
BACK
EXIT
ENGINE SETTINGS
ALARM SETTINGS
HOUR METERS
OTHER SETTINGS
RAIL SETTINGS
CONFIGURATION SETTINGS (5 OF 11)
BACK
EXIT
CONFIGURATION 1
CONFIGURATION 2
CONFIGURATION 3
CONFIGURATION SETTINGS (1 OF 3)
SELECTION
SELECTION
SELECTION
BACK
EXIT
CONFIGURATION SETTINGS (1 OF 3)
END OF LIST
SELECTION
SELECTION
SELECTION
SAMPLE SCREEN B
SAMPLE SCREEN C
SAMPLE SCREEN A
CONFIGURATION 1
CONFIGURATION 2
CONFIGURATION 3
Summary of Contents for Transicold X4 7300
