93
Network
NOTE: The board will reboot when altering certain factory settings.
Communication Module (Optional)
The Communication Module, PN:
SCADA
, is included in all CASlink equipped panels. It obtains
operational data from various connected components. This communication wiring is either RS-485
shielded twisted pair wiring or RJ45 Cat 5 Ethernet wiring.
BACnet
BACnet IP or BACnet MS/TP (
) compatibility can be implemented with this package through a
Protocessor, which is a BTL listed embedded Gateway configured to give a Building Management System
access to monitor and/or control a list of BACnet objects. The Protocessor is mounted and factory pre-
wired inside the Electrical Control Panel (ECP). Field connections to the Building Management System
(BMS) are shown on wiring schematics.
The Protocessor is preconfigured at the factory to use the field protocol of the Building Management
System in the specific jobsite. BACnet objects can only be accessed through the specified port and
protocol.
Figure 45 - BACnet
