CaptiveAire DOAS RTU Series, Installation, Operation And Maintenance Manual

Page: 135 / 136

135
Start-Up and Maintenance Documentation
START-UP AND MEASUREMENTS SHOULD BE PERFORMED AFTER THE SYSTEM HAS BEEN AIR
BALANCED AND WITH THE COOLING ON (Warranty will be void without completion of this form).
Job Information
Unit Information
Maintenance Record
Date of Visit
*
If measured amps exceed the FLA rating on the nameplate, fan RPM must be reduced to decrease
the measured amps below the nameplate FLA rating.
Job Name Service Company
Address Address
City City
State State
Zip Zip
Phone Number Phone Number
Fax Number Fax Number
Contact Contact
Purchase Date Start-up Date
Name Plate and Unit Information Field Measure Information
Model Number Motor Voltage
Serial Number Motor Amperage*
Unit Voltage MUA Blower RPM
Unit Hertz Ambient Wet Bulb Temp (°F)
Unit Phase Ambient Dry Bulb Temp (°F)
Unit FLA Cond 1 Suction Pressure PSI
Unit Supply HP Cond 1 Suction Temperature (°F)
Gas Type Cond 1 Liquid Pressure PSI
Min. Btu/Hr Cond 1 Liquid Temperature (°F)
Max. Btu/Hr Cond 1 Subcooling (°F)
Measured Temp Rise (°F) Cond 1 Superheat (°F)
Airflow Direction - Correct or Incorrect?
Field Measured Information – Initial Readings Field Measured Information – Final Readings
Motor Voltage Motor Voltage
Motor Amperage* Motor Amperage*
MUA Blower RPM MUA Blower RPM
Ambient Wet Bulb Temp °F Ambient Wet Bulb Temp °F
Ambient Dry Bulb Temp °F Ambient Dry Bulb Temp °F
Cond 1 Suction Pressure PSI Cond 1 Suction Pressure PSI
Cond 1 Suction Temperature °F Cond 1 Suction Temperature °F
Cond 1 Liquid Pressure PSI Cond 1 Liquid Pressure PSI
Cond 1 Liquid Temperature °F Cond 1 Liquid Temperature °F
Cond 1 Subcooling °F Cond 1 Subcooling °F
Cond 1 Superheat °F Cond 1 Superheat °F