Canworld CDE500 Series, Manual

Page: 238 / 284

CDE500 Vector Control AC Drive Chapter 6 Parameters Description
Figure 6- 59 the relations between running frequency and filter frequency
H0.19 ① Range: 0~11 Default: 0
Optional card
selection
Control board have a slot for optional card, when you to inset different
board in the slot, you need to set proper value to
H0.19 .
0: no optional card
1: IO1(Y3,T3~T6 of normally open)
2: IO2(AI3,Y3, X7~X10)
3: IO3(X7~X10,T3~T4 of normally open)
4: IO4(PT100, PT1000)
5: PG1(ABZ differential type,optional 5V/12V)
6: PG2(ABZ OC & Push-pull type,optional 5V/12V/24V)
7: COM1(RS485+Modbus RTU,AI3,Y3,X7~X8)
8: COM2(Profibus)
9: COM3(CANopen)
10: COM4(GPRS)
11: COM5(Modbus TCP)
H0.20 Range: 000~999 Default: Model dependent
Product series
AC drive product series, the parameter is read only.
H0.21 Range: 0.00~99.99 Default: Factory setting
Function
firmware version
Function software version of control board, the parameter is read only.
H0.22 Range: 0.00~99.99 Default: Factory setting
Algorithm
firmware version
Algorithm software version of control board, the parameter is read only.
H0.23 Range: 0.00~99.99 Default: Factory setting
keypad firmware
version
Software version of keypad, the parameter is read only.
H0.24 Range: 0~65535 Default: Factory setting
Product series
number higher
bits
Read only.