Canworld CDE500 Series, Manual

Page: 76 / 284

CDE500 Vector Control AC Drive Chapter 5 Parameter List Table
-63-
Function
Code Name Range Default Step Description
b0.06
①
Motor rated power 0.1~999.9 Module
dependent 0.1kw
b0.07 ① Motor rated voltage 1~2000 Module
dependent 1V
b0.08 ① Motor rated current 0.01~655.35 0.01A
b0.09
①
Motor rated frequency 10.00~b0.00 50.00 0.01Hz
b0.10
①
Motor rated speed 1~65535 1460 1RPM
b0.11 Command Source 0~2 0 1
0: Keypad 1: I/O terminal 2: Communication
b0.12
①
Application setting 0~13 0 1
0: General 1: PID application 2: Constant pressure water supply of one AC drive with two pumps
3~13: Reserved
b1 Run & Stop logic
Function
Code Name Range Default Step Description
b1.00 ① Acceleration/Deceleration
mode 0~1 0 1 0: Linear
1: S Curve
b1.01 ① Time proportion of S-curve
start segment 0.0~(100.0-
b1.02) 30.0 0.1%
b1.02
①
Time proportion of S-curve
end segment 0.0~(100.0-
b1.01) 30.0 0.1%
b1.03 Startup frequency 0.00~50.00 0.00 0.01Hz
b1.04 ① Startup frequency holding
time 0.0~100.0 0.0 0.1Sec
b1.05 Start mode 0~1 0 1
0: Ramp start from startup frequency 1: Flying start
b1.06
①
Flying start mode 0~2 0 1
0: From frequency at stop 1: From zero speed 2: From maximum frequency
b1.07 ① Flying start current 50.0~200.0 90.0 0.1% The current limit value of
flying start process
b1.08 flying start speed 1~100 5 1
b1.09 ① V/f coefficient for flying start 30.0~100.0 100.0 0.1%
b1.10 Stop mode 0~1 0 1 0: Ramp stop
1: Coasting stop
b1.11 ① Start DC brake current 0~100 20 1%
b1.12
①
Start DC brake time 0.0~100.0 0.0 0.1Sec
b1.13 Initial frequency of stop DC
brake 0.00~b0.00 0.00 0.01Hz