CDE360 Vector Control AC Drive Chapter 8 Communication Protocol
AC drive error address
AC drive error info
6407H
20: Output osting-phase
21: Contactor error
22: Current check error
23: The cycle by cycle current limiting error
24: AC drive overload
25: Motor overload
26: Motor offload
27: Motor over temperature
28: Short circuit to ground of motor
29: External error
30: Keypad communication error
31: RS485 communication error
32: Optional card communication error
33: Optional card connection error
34: Motor self-tuning error
35: PID feedback out of range
36: EEPROM read/write error
37: Parameter set error
38: Accumulative power up time error
39: Accumulative run time error
40: Switch motor error when run
41: Speed offset too large
42: Motor over speed
43: Magnetic pole position check error
44: UVW signal feedback error
45: Encoder error
46: Self define error 1
47: Self define error 2
48: Motor over current speed loss
49: Motor over voltage speed loss
50: Motor under voltage frequency reduction
51: System error
52: Multi-pump interlock warning
53: Buffer resistance overload
54: Dormancy warning
