Canon WUX450, User Manual

Page: 101 / 308

101
Adjusting Image Quality (Image Adjustment)
Oper
ation
Setti
ng Fu
nctio
n
s fr
om Me
nus
Reducing Image
Noise
(Noise reduction)
> [Image adjustment] > [Advanced
adjustment] >
[Noise reduction]
You can reduce image noise.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default for HDMI (when [HDMI
In] ( P113 ) is set to [Auto]) is [Off] and when
Component is used, it is set to [Weak].
• Image resolution may seem lower when
noise reduction is applied.
• Select [Weak] for fast-moving images.
Select [Strong] for slow-moving images.
• The adjustment you have made is stored as
adjusted values for the input signals and
image mode of the current projection.
• When [HDMI In] ( P113 ) is [Computer], this
setting is not displayed.
Dynamic Gamma
Adjustment
> [Image adjustment] > [Advanced
adjustment] >
[Dynamic gamma]
You can adjust the gradation
representation of light and dark
portions of an image automatically.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default settings are [Off] when
the connected equipment is a Computer
(ANALOG PC, DIGITAL PC, HDMI (when
[HDMI In] (
P113 ) is [Computer])) and
[Weak] when the connected equipment is
AV equipment (COMPONENT, HDMI (when
[HDMI In] (
P113 ) is [Auto])).
• The adjustments you have made are stored
as adjusted values for the input signals and
image mode of the current projection.
HDMI Component LAN
Digital PC Analog PC USB
Off Disables noise reduction.
Weak
Middle
Strong Specifies the intensity of the noise
reduction in three steps.
HDMI Component LAN
Digital PC Analog PC USB
Off Dynamic gamma is disabled.
Weak
Middle
Strong Specifies the intensity of the
dynamic gamma in three steps.