Canon Saddle Finisher-AF2, Service Manual

Page: 46 / 244

Chapter 2
2-20
F-2-67
5) Close the front cover of the finisher.
6) Move the latch mount (rear) [1] in the direction of the arrow and insert it
to the pin to fix it.
- 1 screw [2] (use the screw removed in step 7) "Before Installing the
Finisher")
F-2-68
7) Check the height between the finisher [1] and the Perfect Binder. [2].
F-2-69
8) Install the rear small cover.
9) Remove the rear cover [1] of the Perfect Binder.
- 5 screws [2]
F-2-70
10) Install the shunt cable [1].
- 2 screws (RS tightening; M4X10) [2]
[2]
[1]
[2] [1]
CAUTION:
Height difference should be /-2mm. Execute "Height Adjustment"
if the difference is +/- 2mm or more.
[1] [2]
[1]
[2]
[2]