Canon Saddle Finisher-AF2, Service Manual

Page: 103 / 244

Chapter 3
3-45
3.7.2 Stitcher area jam detection.
0020-6606
To detect whether there is paper or not, or whether the paper can properly be fed or not, the followings are the inspection sensor for paper.
- Saddle inlet sensor (PS101)
- Saddle small sensor (PS103)
- Saddle vertical path sensor (PS105)
- Saddle leading edge path sensor (PS106)
- Saddle plate home position sensor (PS110)
- Saddle press front sensor (PS111).
- Saddle press positioning sensor (PS113)
- Saddle stitcher sensor (SU).
F-3-55
Whether jam is occurred or not, determined by whether there is paper or not in the sensor area by the time of timing check that memorized in advance by Finisher
Controller PCB.
When Finisher Controller PCB detected jam, it will break feeding/delivery movement. And at the same time inform the connection machines about the jam occur-
rence.
T-3-3
Jam type
Sensor
Jam description Code
Saddle Inlet Sensor Delay PS101 Saddle Inlet Sensor (PS101) doesn't detect the paper within the specified time (distance)
after Lower Path Sensor (UN24) detects the paper and do the feeding. 1042
Saddle Inlet Sensor Stationary PS101 The paper doesn't come out from Saddle Inlet Sensor (PS101) within the specified time
(distance) after Lower Path Sensor (UN24) detects the paper and do the feeding. 1143
Saddle Vertical Path Sensor Delay PS105 The Saddle Vertical Path Sensor (PS105) doesn't detect the paper within the specific time
after Saddle Push-on Plate movement starts. 1046
Saddle Vertical Path Sensor Stationary PS105 The paper doesn't come out from Saddle Vertical Path Sensor (PS105) within the
specified time (distance) after Saddle Push-on Plate detects the paper and do the feeding 1147
Saddle Press Front Sensor Delay PS111 The Saddle Press Front Sensor (PS111) doesn't detect the paper within the specific time
after Saddle Push-on Plate movement is completed. 104A
Saddle Press Front Sensor Stationary PS111 The paper doesn't come out from Saddle Press Front Sensor (PS111) within the specified
time (distance) after Saddle Push-on Plate movement is completed. 114B
Stitcher staple SU Stitcher Unit doesn't detect the motor activation within the specified time after Stitcher
Motor (M110) activates. 1550
Saddle Push-on Plate PS110 Saddle Push-on Plate Sensor (PS110) doesn't detect motor activation within specified
time after Saddle Push-on Plate Motor (M106) activates. 1F52
Saddle Press Home Position Sensor
Delay PS113 Home Position can't be detected on the Saddle Press Home Position Sensor (PS113)
within the specified time after Saddle Stack Delivery movement starts. 1054
Saddle Press Home Position Sensor
Stationary PS113 When Saddle Press movement starts, but Saddle Press Home Position Sensor (PS113)
still keep detecting Home Position. 1155
PS101
PS103
PS111
PS105
PS113
PS110
SU