Canon Saddle Finisher-AF2, Service Manual

Page: 198 / 244

Chapter 5
5-36
F-5-163
[1] Normal stacking
[2] Stacking while stacking limit is cancelled
T-5-7
Following describes the detailed adjustment method:
1) Turn ON the power of the finisher.
2) Turn ON the power switch of the host machine to be on standby.
3) Open the front cover and put the door switch tool into the door switch [1].
F-5-164
4) Remove the screw [2] to remove the switch cover [1].
F-5-165
5) Set DIP SW382 [1] on the switch PCB as shown in the figure below.
F-5-166
6) Press switch SW385 [1] so that this adjustment is ready now.
F-5-167
7) Pressing push switch SW384 [1] once displays "+1" on the LED [2].
MEMO:
This adjustment is for the upper tray only. Thus, cancellation of the stacking
limit for the lower tray is not available.
Following table shows stacking capacity for the upper tray while the
stacking limit is cancelled.
Paper type
Stacking capacity
At normal
stacking When stacking limit is
cancelled
Plan paper (extra-length size) 1000 sheets 1500 sheets
Coated paper (half size) 1500 sheets 3000 sheets
Coated paper (large size) 1000 sheets 1500 sheets
[A]
[B]
[1]
[2]
[1]
SW382
SW381
SW383
(-) (+) ENTER
SW384 SW385
DSP381
[1]
SW382
SW381
SW383
(-) (+) ENTER
SW384 SW385
DSP381
[1]