Canon Saddle Finisher-AF2, Service Manual

Page: 141 / 244

Chapter 4
4-31
3) Remove the E-ring [1] and the washer [2].
F-4-129
4) Shift the 2 couplings [1] in the direction of the arrow.
- 1 screw each [2] (loosen)
F-4-130
How to remove the front belt roller
5) Release the delivery roller shaft (1) [1] and remove the belt roller [2].
F-4-131
How to remove the rear belt roller
6) Remove the E-ring [1].
F-4-132
7) Shift the gear [1] and remove the parallel pin [2].
Note:Points to note when installing the delivery roller shaft
Make sure to install it after adjusting the D-cut part of the delivery
roller shaft with the groove on the mounting plate.
[1]
[1] [2]
[2]
[2]
[1]
[1]
[2]
[1]