background image

i

Canon Software License Agreement

IMPORTANT - READ THIS AGREEMENT BEFORE USING THE SOFTWARE ON THE CD-ROM IN 
THIS BOX. BY USING THE SOFTWARE, YOU AGREE TO BE BOUND BY THE TERMS OF THIS 
AGREEMENT.
This is a license agreement (the “Agreement”) between you and Canon Inc. (“Canon”).
IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT, DO NOT 
USE THE SOFTWARE PROGRAM ON THE CD-ROM (INCLUDING ALL SOUND AND IMAGE 
DATA) AND THE USER MANUAL IN THIS BOX (COLLECTIVELY, THE “SOFTWARE”) AND 
PROMPTLY RETURN THE SOFTWARE TO YOUR POINT OF PURCHASE FOR A REFUND.
In consideration of the right to use the SOFTWARE, you agree to abide by the terms and 
conditions of this Agreement.
1. LICENSE:

 Canon grants you the personal, non-exclusive right to use the SOFTWARE only on a 

single computer. You may physically transfer the SOFTWARE from one computer to another 
provided that the SOFTWARE is used on only one computer at a time. You shall not install or use 
the SOFTWARE on a network, multiple CPU, multiple site arrangement, or any other hardware 
configuration where the SOFTWARE is accessible to more than one CPU or to more than one 
user.
With respect to the sound and image data (“Data”) contained in the Software, which are to be 
downloaded to the applicable Canon digital camera product, Canon grants you a personal, non-
exclusive license to use the Data on a single Canon digital camera product only.

YOU SHALL NOT ASSIGN, SUBLICENSE, RENT, LEASE, LOAN, CONVEY OR OTHERWISE 
USE, TRANSFER, COPY, TRANSLATE, CONVERT TO ANOTHER PROGRAMMING 
LANGUAGE, ALTER, MODIFY, DECOMPILE OR DISASSEMBLE THE SOFTWARE, IN WHOLE 
OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THIS AGREEMENT.

2. BACK-UP COPY:

 You may make one copy of the SOFTWARE solely for back-up purposes, or 

copy the SOFTWARE onto the permanent storage device (e.g. a hard disk) of your computer and 
retain the original for back-up purposes. Any other copying of the SOFTWARE is a violation of 
this Agreement. You must reproduce and include the copyright notice on the back-up copy.

3. SUPPORT AND UPDATES:

 Neither Canon, nor its subsidiaries, dealers or distributors will be 

responsible for providing maintenance or support for use of the SOFTWARE. No updates, fixes or 
support will be made available for the SOFTWARE.

4. LIMITED WARRANTY AND LIMITATION OF LIABILITY:

 It is your responsibility to choose, 

maintain and match the hardware and software components of your computer system. Thus 
Canon does not guarantee uninterrupted service or correction of errors or that the functions or 
performance of the SOFTWARE will meet your requirements. THE SOFTWARE IS LICENSED ON 
AN “AS IS” BASIS AND WITHOUT WARRANTY OR CONDITION OF ANY KIND. The CD-ROM 
storing the SOFTWARE is warranted only against defective material under normal use for a 
period of ninety (90) days after purchase from an authorized Canon dealer as evidenced by your 
sales receipt. Your sole remedy for a defective CD-ROM shall be replacement of the same 
without charge when returned by you at your expense to your point of purchase and proven to 
be defective upon inspection. The Replacement CD-ROM will be warranted for the remainder of 
the original ninety (90) day warranty period of the defective CD-ROM. The limited warranty does 
not apply if the failure of the CD-ROM resulted from accident, abuse or misapplication of the 
SOFTWARE and shall not extend to anyone other than the original user of the SOFTWARE.

EXCEPT AS SPECIFICALLY SET FORTH IN THIS PARAGRAPH 4, CANON, CANON’S 
SUBSIDIARIES, DISTRIBUTORS AND DEALERS DISCLAIM ALL WARRANTIES, OR 
CONDITIONS, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OR CONDITION OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE 
SOFTWARE.
NEITHER CANON NOR ANY OF CANON’S SUBSIDIARIES, DISTRIBUTORS OR DEALERS IS 
LIABLE FOR ANY DAMAGES HOWSOEVER CAUSED, INCLUDING WITHOUT LIMITATION, 
DIRECT, CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE INCLUDING LOSS OF 
PROFITS, EXPENSE OR INCONVENIENCE HOWSOEVER CAUSED OR ARISING OUT OF THE 
SOFTWARE OR THE USE THEREOF.

READ CAREFULLY BEFORE USING

Summary of Contents for PowerShot G5





































































































































Reviews: