Canon MultiPASS C50 Page 173 User Manual Download

Page: 173 / 305

Chapter 6

Scanning Documents and Making Copies

6-3

Scanning

Documents and

Making Copies

When the document feed lever is set to Manual Document Feed:

Size:

• Maximum: 216 mm

approx. 1 m

• Minimum: 80

45 mm

Quantity:

• 1 page

Thickness:

• 0.08–0.43 mm

Weight:

• 90–340 g/m

Problem documents

❏

To prevent paper jams in the Automatic Document Feeder (ADF),
do not use any of the following in the MultiPASS C50:

❏

Remove all staples, paper clips, or any other fasteners before loading
the document into the Automatic Document Feeder (ADF).

❏

Make sure any glue, ink, or correction fluid on the paper is
completely dry before loading the document into the Automatic
Document Feeder (ADF).

❏

If you have a document that will not feed into the MultiPASS C50
properly, make a photocopy of the document, then load the copy
instead.

WRINKLED OR
CREASED PAPER

CURLED OR
ROLLED PAPER

TORN PAPER

ONION SKIN OR
THIN PAPER

COATED PAPER

CARBON PAPER OR
CARBON-BACKED
PAPER

Summary of Contents for MultiPASS C50


















































































































































































































































































































Search results

Summary of Contents for MultiPASS C50

Reviews:

Related manuals for MultiPASS C50

Brands by name

Popular brands

Canon MultiPASS C50, User Manual

Search results

Summary of Contents for MultiPASS C50

Reviews:

Related manuals for MultiPASS C50

Brands by name

Popular brands