manualshive.com logo in svg

Canon MultiPASS C50, User Manual

Share
Download
Canon MultiPASS C50 User Manual Download Page 204

8-8

Troubleshooting

Chapter 8

Jams in the Sheet Feeder

Use this procedure if the recording paper jams or misfeeds in the sheet
feeder. If this happens, the message CLEAR PAPER JAM appears in the
display.

1.

Gently pull any jammed paper out of the unit as shown.

2.

Remove the paper stack from the sheet feeder and reload it,
following the instructions in “Loading Print Media for Automatic
Feed” on page 2-45. 

❑

Make sure you push the paper to the back and right of the
sheet feeder, and that the stack is not higher than the paper
limit mark (

D

). See page 2-47 for more details.

3.

Press 

STOP

to clear the error message.

❏

If the ALARM lamp is on, press the 

RESUME

button to clear

the error message.

❏

If you are printing from a Windows application, follow the
instructions displayed by the software on your PC.

N

If the paper jam occurred while a fax was being received into the
MultiPASS C50’s memory, that fax will print automatically when the
jam is cleared.

Summary of Contents for MultiPASS C50


















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands