Canon MultiPASS C50, User Manual

Page: 102 / 305

2-74
Setting Up Your MultiPASS C50 Chapter 2
Testing the MultiPASS C50
After you have assembled your MultiPASS C50, installed a BJ cartridge,
loaded the print media, and entered your user identification
information, you can make sure the MultiPASS C50 is printing properly
by making several copies of a document. For instructions, see “Making
Copies” on page 6-13.
❏
If you are printing on plain paper, note the following:
• If the printed sheets are curled as they exit the MultiPASS C50,
remove them from the output tray immediately to avoid paper
jams.
• Make sure your text or graphics fall within the printable area.
• If the print head is printing past the edge of the paper and
directly on the platen, clean the platen. See “Cleaning the
MultiPASS C50’s Interior” on page 9-2.
❏
If you are printing on transparencies or back print film, note the
following:
• Remove each sheet of film after it exits from the unit. Do not let
film stack up on the output tray.
• Allow printed film to dry before storing it. (Canon film needs
about 15 minutes to dry properly.)
• After the film dries, cover each printed side with a sheet of
plain paper before storing. This is necessary even if you put the
film in a clear file.