Canon MultiPASS C50, User Manual

Page: 279 / 305

Glossary
G-5
Glossar
y
Dithering
A method by which colour dots are combined on a page to produce a
wide spectrum of colours.
Document
The sheet of paper containing the data that you send to, or receive from
a unit.
dpi
Dots per inch . A unit of measurement for indicating a printer’s
resolution. Your MultiPASS C50 can produce a resolution up to 720 dpi
precision (horizontal) depending on the printer control mode and the
application you are using.
Dual access (Multitasking)
Enables the MultiPASS C50 to receive a fax, even if it is copying or
printing a document. Also enables you to load other faxes into memory,
make copies, print out reports, print documents or register information
while the MultiPASS C50 sends a fax from memory.
E
ECM
Error Correction Mode . The ability of your MultiPASS C50 to reduce
system and line errors when sending or receiving from another fax with
ECM capability. ECM is most effective in areas where the telephone
lines are in poor condition or there is frequent interference on the line.
Do not use ECM if you need to send a document quickly and you are
sure the other party can read your transmission without it (turning off
ECM also turns off MMR).
Extension
A telephone connected to the MultiPASS C50 that is used in place of the
handset. You can use the extension telephone to activate incoming
reception of documents manually.
F
Factory default
The MultiPASS C50 is preprogrammed in the factory with settings that
we recommend. These are known as Factory Default Settings. You can
customise your MultiPASS C50 by programming settings other than the
Factory Default Settings.