![background image](http://html1.mh-extra.com/html/canon/lv-7565/lv-7565_specification_4149439017.webp)
Expand Serial Command Specification
Page 16 of 46
8.4.7. CF_WBAL- Command
Command “CF_WBAL-%1_%2” [CR]
%1
“R” --------------- Red
“G” --------------- Green
“B” --------------- Blue
%2
“000 ~ 063” ----- Directly select color value by White Balance %1 determination
“UP” ------------ Color value for White Balance %1 determi1
“DN” ------------ Color value for White Balance %1 determination -1
Details
Set the user control color value by white balance %1 determination.
The value set by their Command will not be saved to the Projector.
Therefore, when All Off the Projector, the value will return to the original
setting. (For Stand-by mode, this value stays.)
Only valid when it is in the usual Power On state.
Acceptable
“000” [CR]
Response
Unacceptable “Error Code” [CR]
8.4.8. CF_COLTEMP Command
Command “CF_COLTEMP_%1” [CR]
%1
“000 ~ 003”
Details
Set the Color Temp.
The value set by their Command will not be saved to the Projector.
Therefore, when All Off the Projector, the value will return to the original
setting. (For Stand-by mode, this value stays.)
Only valid when it is in the usual Power On state.
Acceptable
“000” [CR]
Response
Unacceptable “Error Code” [CR]
8.4.9. CF_NZRED Command
Command “CF_NZRED_%1” [CR]
%1
“ON” ------------- Select Noise Reduction
“OFF” ------------ Cancel Noise Reduction
Details
Set / Cancel Noise Reduction.
The value set by their Command will not be saved to the Projector.
Therefore, when All Off the Projector, the value will return to the original
setting. (For Stand-by mode, this value stays.)
Only valid when it is in the usual Power On state.
Acceptable
“000” [CR]
Response
Unacceptable “Error Code” [CR]
8.4.10. CF_PROGV Command
Command “CF_PROGV_%1” [CR]
%1
“L1” ------------ Select Progressive Mode L1
“L2” ------------ Select Progressive Mode L2
“OFF” ---------- Cancel Progressive Mode
Details
Set / Cancel Progressive Mode.
The value set by their Command will not be saved to the Projector.
Therefore, when All Off the Projector, the value will return to the original
setting. (For Stand-by mode, this value stays.)
Only valid when it is in the usual Power On state.
Acceptable
“000” [CR]
Response
Unacceptable “Error Code” [CR]