Expand Serial Command Specification
Page 40 of 46
9.8. Screen Series Status Read Command
9.8.1. CR_FLSCREN Command
Command “CR_FLSCREN” [CR]
Details
Read the screen size status that Full Screen is selected or not.
Acceptable
“000_%1” [CR]
%1
“ON” -------- Full Screen setting
“OFF” ------- Full Screen not setting
Response
Unacceptable “Error Code” [CR] --- Invalid
“?” [CR] ----------------- When receives unclear Command
9.8.2. CR_SCREEN Command
Command “CR_SCREEN” [CR]
Details
Read selected Screen size
Acceptable
“000_%1” [CR]
%1
“NORMAL” ------ Selected 4:3 screen, Can not signal to 16:9
“WIDE” ------------ Selected 16:9 screen (non-4:3 signal)
Response
Unacceptable “Error Code” [CR] --- Invalid
“?” [CR] ----------------- When receives unclear Command
9.8.3. CR_ KYSTNMODE Command
Command “CR_KYSTNMODE” [CR]
Details
Read Keystone store mode setting status
Acceptable
“000_%1” [CR]
%1
“STR” -------- Store mode is Store
“RST” -------- Store mode is Reset
Response
Unacceptable “?” [CR] ------------------- Command
9.8.4. CR_ANAMORPHIC Command
Command “CR_ANAMORPHIC” [CR]
Details
Read Anamorphic setting status
Acceptable
“000_%1” [CR]
%1
“ON” ---------- Anamorphic is On setting
“OFF” --------- Anamorphic is Off setting
Response
Unacceptable “Error Code” [CR] --- Invalid
“?” [CR] ----------------- Command
9.8.5. CR_VSCALE Command
Command “CR_VSCALE” [CR]
Details
Read V-Scale setting status
Acceptable
“000_%1” [CR]
%1
“-32” ~ “032”
Response
Unacceptable “?” [CR]