Expand Serial Command Specification
Page 29 of 46
8.10.4. CF_CEIL Command
Command “CF_CEIL_%1” [CR]
%1
“ON” ------- Select Ceiling
“OFF” ------ Cancel Ceiling
Details
Set / Cancel Ceiling. (Only valid when it is in the usual Power On state)
The value set by this Command is stored in EEEPROM. When All Off the
Projector, the setting will
valid.
Acceptable
“000” [CR]
Response
Unacceptable “Error Code” [CR]
8.10.5. CF_REAR Command
Command “CF_REAR_%1” [CR]
%1
“ON” ------- Select Rear
“OFF” ------ Cancel Rear
Details
Set / Cancel Rear. (Only valid when it is in the usual Power On state)
The value set by this Command is stored in EEEPROM. When All Off the
Projector, the setting will
valid.
Acceptable
“000” [CR]
Response
Unacceptable “Error Code” [CR]
8.10.6. CF_RCODE Command
Command “CF_RCODE_%1” [CR]
%1
“001” ------------ Select Code1
“002” ------------ Select Code2
Details
Select Remote Control Code. (Only valid when it is in the usual Power On
state)
The value set by this Command is stored in EEEPROM. When All Off the
Projector, the setting will
valid.
Acceptable
“000” [CR]
Response
Unacceptable “Error Code” [CR]
8.10.7. CF_LANG Command
Command “CF_LANG_%1” [CR]
%1
“ENG” ----------- Select English
“DEU” ----------- Select German
“FRA” ----------- Select French
“ITA” ------------- Select Italy
“ESP” ------------ Select Spanish
“POR” ------------ Select Portuguese
“NED” ----------- Select Dutch
“SVE” ----------- Select Swedish
“JPN” ----------- Select Japanese
“CHI” ------------ Select Chinese
“KOR” ----------- Select Korean
“RUS” ----------- Select Russian
Details
Set OSD Language. (Only valid when it is in the usual Power On state)
The value set by this Command is stored in EEEPROM. When All Off the
Projector, the setting will
valid.
Acceptable
“000” [CR]
Response
Unacceptable “Error Code” [CR]