Expand Serial Command Specification
Page 12 of 46
6.5. Screen Status Read Command Table
Status read command
Item
CR_FLSCREN [CR]
Read Full Screen setting
CR_SCREEN [CR]
Read Screen Size setting
CR_KYSTNMODE [CR]
Read Keystone Store mode setting
CR_ANAMORPHIC [CR]
Read Anamorphic setting
CR_VSCALE [CR]
Read V-Scale setting
CR_VPOS [CR]
Read V-Position setting
CR_HSCALE [CR]
Read H-Scale setting
CR_HPOS [CR]
Read H-Position setting
6.6. Lamp Status Read Command Table
Status read command
Item
CR_LAMPREPL [CR]
Read Lamp Replacement information
CR_LAMPMODE [CR]
Read Lamp mode
CR_PROJH [CR]
Read Total Projector running time
6.7. Sound Status Read Command Table
Status read command
Item
CR_VOLUME [CR]
Read Volume value
CR_MUTE [CR]
Read Sound mute setting
CR_BLTINSP [CR]
Read Built-in Speaker setting
6.8. Setting Status Read Command Table
Status read command
Item
CR_BBACK [CR]
Read Blue Back setting
CR_DISP [CR]
Read Display setting
CR_LOGO [CR]
Read Logo setting
CR_RCODE [CR]
Read Remote Control Code setting
CR_LANG [CR]
Read OSD Language setting
CR_ON-STA [CR]
Read ON Start setting
CR_P-MANE [CR]
Read Power Management setting
CR_P-MANETIME [CR]
Read Power Management Time setting
CR_FANSPEED [CR]
Read Fan Control Speed setting
CR_KEYDIS [CR]
Read RC / KEY inhibit setting
6.9. Other Status Read Command Table
Status read command
Item
CR_SIGNAL [CR]
Read Signal or No Signal
CR_VMUTE [CR]
Read No Show setting
CR_FREEZE [CR]
Read Freeze setting
CR_PTIMER [CR]
Read P-Timer operating status
CR_INFPFAIL [CR]
―――
CR_TEMPWARN [CR]
Read if sensors are exceeding critical temperature or
not
CR_TEMPFAIL [CR]
Read the temperature when sensors approached
critical temperature