Expand Serial Command Specification
Page 25 of 46
8.7.5. CF_KEYSTONE Command
Command “CF_KEYSTONE_%1” [CR]
%1
“UP” --------- Make the screen image length at the top edge shorter with a
small range.
“FUP” ------- Make the screen image length at the top edge shorter with a large
range.
“DN” -------- Make the screen image length at the bottom edge shorter with a
small range.
“FDN” ------ Make the screen image length at the bottom edge shorter with a
large range.
“LEFT” ----- Make the screen image length at the left edge shorter with a
small range.
“FLEFT” --- Make the screen image length at the left edge shorter with a large
range.
“RIGHT” --- Make the screen image length at the right edge shorter with a
small range.
“FRGT” ---- Make the screen image length at the right edge shorter with a
large range.
“RST” ------- Keystone off
Details
Change Keystone range. (Only valid when it is in the usual Power On state)
When the range is over the maximum, a Projector accepts the Command, but it
does not execute.
Acceptable
“000” [CR]
Response
Unacceptable “Error Code” [CR]
8.7.6. CF_KYSTNMODE Command
Command “CF_KYSTNMODE_%1” [CR]
%1
“STR” ---------- Set Keystone store mode to Store
“RST” ---------- Set Keystone store mode to Reset
Details
Set Keystone store mode. (Only valid when it is in the usual Power On state)
Acceptable
“000” [CR]
Response
Unacceptable “Error Code” [CR]
8.7.7. CF_ ANAMORPHIC Command
Command “CF_ANAMORPHIC_%1” [CR]
%1
“ON” ---------- Set Anamorphic to On
“OFF” --------- Set Anamorphic to Off
Details
Set Anamorphic On / Off. (Only valid when it is in the usual Power On state)
When Anamorphic set to On, the screen will be 4:3 even if it is HDTV.
When Anamorphic set to Off, HDTV will be 16:9.
Acceptable
“000” [CR]
Response
Unacceptable “Error Code” [CR]