Expand Serial Command Specification
Page 38 of 46
9.7. Input Series Status Read Command
9.7.1. CR_INPUT Command
Command “CR_INPUT” [CR]
Details
Read selected Input No.
Acceptable
“000_%1” [CR]
%1
“1” ~ “4”
Response
Unacceptable “?” [CR]
9.7.2. CR_SOURCE Command
Command “CR_SOURCE” [CR]
Details
Read selected Source
Acceptable
“000_%1” [CR]
%1
“DIGITAL” -------- DVI inputs is selected
“ANALOG” -------- Analog RGB is selected
“SCART” ----------- Scart is selected
“HDCP” ------------- HDCP is selected
“VIDEO” ----------- Video input is selected
“S-VIDEO” --------- S-Video input is selected
“YPBPR” ----------- Y/Pb/Pr input is selected
Response
Unacceptable “Error Code” [CR] --- Invalid
“?” [CR] ----------------- When receives unclear Command
9.7.3. CR_SRCINP1 Command
Command “CR_SRCINP1” [CR]
Details
Read Input 1 Source
Acceptable
“000_%1” [CR]
%1
“DIGITAL”---------- DVI mode status
“ANALOG”--------- Analog RGBmode status
“SCART”------------ Scart mode status
“HDCP”------------- HDCP mode status
“OUT”--------------- Monitor OUT mode status
Response
Unacceptable “?” [CR]
9.7.4. CR_SRCINP2 Command
Command “CR_SRCINP2” [CR]
Details
Read Input 2 Source
Acceptable
“000_%1” [CR]
%1
“VIDEO” ------------ Video mode status
“YPBPR” ------------ Y/Pb/Pr mode status
“ANALOG”--------- Analog RGBmode status
Response
Unacceptable “?” [CR]