![background image](http://html1.mh-extra.com/html/canon/lv-7565/lv-7565_specification_4149439028.webp)
Expand Serial Command Specification
Page 27 of 46
8.8. Lamp Series Command
8.8.1. CF_LAMPH Command
Command “CF_LAMPH_%1” [CR]
%1
“RST”
Details
Reset total Lamp running time. (Only valid when it is in the usual Power On
state)
Acceptable
“000” [CR]
Response
Unacceptable “Error Code” [CR]
8.8.2. CF_LAMPMODE Command
Command “CF_LAMPMODE_%1” [CR]
%1
“NORMAL” -------- Set Lamp mode to Normal
“ECO” ---------------- Set Lamp mode to Silent
“AUTO” ------------- Set Lamp mode to Auto
Details
Set Lamp mode. (Only valid when it is in the usual Power On state)
The value set by this Command is stored in EEEPROM. When All Off the
Projector, the setting will
valid.
Acceptable
“000” [CR]
Response
Unacceptable “Error Code” [CR]
8.9. Sound Series Command
8.9.1. CF_VOLUME Command
Command “CF_VOLUME_%1” [CR]
%1
“000 ~ 063” ----------- Directly set Volume value
“UP” ----------------- Volume setting value +1
“DN” ----------------- Volume setting value -1
Details
Control Volume setting value. (Only valid when it is in the usual Power On
state.)
The same operation as a Remote control’s turning up/down the volume. Also,
the Command directly sets the volume value.
When setting volume value like Remote control unit operation, Sound Mute On
will be canceled. The setting value will be stored in a Projector.
Acceptable
“000” [CR]
Response
Unacceptable “Error Code” [CR]
8.9.2. CF_MUTE Command
Command “CF_MUTE_%1” [CR]
%1
“ON” ------- Set Sound Mute to On
“OFF” ------ Set Sound Mute to Off
Details
Control Sound Mute On / Off. (Only valid when it is in the usual Power On
state)
Acceptable
“000” [CR]
Response
Unacceptable “Error Code” [CR]