Canon Laser Class 700 Series, Reference Manual

Page: 147 / 221

Setting Up and Using PIN Codes 4-29
Restr
icting the Use of the Machine
4
CF-PL Reference Guide_USEN HT1-2187-000-V.1.0
Using Speed Dialing with PIN Code Access
If you registered a PIN code when you registered numbers for speed dialing,
perform the following procedure. (See “Setting PIN Code Access for Speed Dialing,”
on p. 4-27.)
1
Place your documents on the machine.
For instructions explaining how to place your documents on the machine, see
Chapter 3, “Sending Documents,” in the
Facsimile Guide .
NOTE
• You can adjust the resolution, contrast, and document type for scanning. (See
Chapter 3, “Sending Documents,” in the Facsimile Guide .)
• You can also specify a sender’s name with [TTI Selector]. (See Chapter 3,
“Sending Documents,” in the Facsimile Guide .)
2
Press a speed dialing key or press [Coded Dial], followed by a
three digit code.
NOTE
If you want to use sequential broadcasting, dial the second destination within five
seconds of dialing the first destination. All subsequent destinations must be
specified within 10 seconds of each other. For details about sequential
broadcasting, see Chapter 3, “Sending Documents,” in the
Facsimile Guide .
3
Press [Start].
1
72
Coded Dial
Start