List of LCD Display Messages (Alphabetical List)
7-18
T
roub
leshooting
7
CF-PL Reference Guide_USEN HT1-2187-000-V.1.0
List of LCD Display Messages
(Alphabetical List)
This section explains a list of messages that appear on the LCD display when a
problem occurs in the machine.
CHECK DOCUMENT
Cause
A document page may be jammed or may not have been fed correctly by the
ADF (Automatic Document Feeder).
Remedy 1 Clear the paper jam, and try placing the document again. (See “Clearing
Document Feed Jams,” on p. 7-2.)
Remedy 2 If the document does not feed correctly, clean the rollers. (See “Cleaning the
Scanning Area,” on p. 6-14.)
CHECK PRINTER
Cause
Printer malfunction.
Remedy
Press [Stop]. Disconnect the machine from its power source, wait a few minutes,
then connect the power cord to the power outlet. If the machine is connected to
a UPS (Uninterruptable Power Supply), disconnect the power cord, and plug
into an AC outlet. If the message remains on the LCD display and the machine
does not return to the Standby mode, call your local authorized Canon dealer.
CHECK PRINTER COVER
Cause
The printer cover is not closed completely.
Remedy
Check the printer cover, and make sure that it is completely closed. Make sure a
toner cartridge is installed, and resting properly underneath the printer cover.
DOCUMENT TOO LONG
Cause
The document is longer than 39 3/8" (1 meter).
Remedy
Make a reduced copy of the document with a copy machine, then send the copy.
You can also cut the document, and paste it onto smaller sheets of paper. (See
Chapter 14,
“
Appendix,
”
in the
Facsimile Guide.
)
Summary of Contents for Laser Class 700 Series
Page 1: ......
Page 2: ...CF PL Reference Guide_USEN HT1 2187 000 V 1 0 LASER CLASS 700 Series Reference Guide...
Page 118: ...Canceling a Job 3 6 Checking Canceling a Job 3 CF PL Reference Guide_USEN HT1 2187 000 V 1 0...
Page 212: ...When Trouble Occurs 7 22 Troubleshooting 7 CF PL Reference Guide_USEN HT1 2187 000 V 1 0...
